animated_McLean_Incorporated.gif (41591 bytes)       small_Model_1000.gif (7448 bytes)           Slide_animation.gif (52037 bytes) 
Model #1000

Home
Up
Model #500
Model #600
Model #750
Model #1000
Model #1500

   

Model #1000  6-axis Lathe 

Standard Equipment
 

bulletHeavy Duty Tail Slide with "Box & L" Move #10-550
bulletFront Relieving Slide #10-362
bulletRear Relieving Slide  #10-364
bulletFront & Rear Subplate  #10-299
bulletTail Toolholder  #10- 276 with Set of 5 Bushings
bulletFront Toolholder  #10-274
bulletRear Toolholder  #10-275
bulletPeck Drilling for Deep Holes
bulletProgram Storage
bulletIndividual Spindle Speeds for each Slide
bulletInstant Reverse- Rear Tools can be run in upright position
bulletRegenerative Breaking Reduces Electrical Cost
bulletFlood and Spray Coolant Operates only when Spindle is Running
bulletElectrical Lockout Switch
bulletSlide Valve for Air On and Off
Specifications:
Spindle Speeds 60-2100 RPM Variable Std. (3200 RPM Optional)
Spindle Construction Single Piece with Precision Ball Bearings
Spindle Capacity 1-1/16" Diameter Through Spindle With 5C Collet
Spindle Drive Motor 1 HP DC (1-1/2 HP Optional)
Brake Regenerative
Dovetail Width 3-3/8"
Spindle Centerline to Dovetail 4-1/2"
Length of Bed from Face of Spindle 13"
Swing over Bed 9"
Overall Height 57-1/2"
Overall Length 39-3/4"
Overall Depth 35"
Approximate Weight 630 Pounds
Power Requirements 220 VAC - 60 cycle Single Phase
Air Requirements 80 - 100 PSI